You are heretricks

tricks


Trick for Remote Support: How to Reboot a Win7 System When What You Are Doing Breaks the Network

I have to re-figure this out every time I need to do it, every few years, so I wrote this to remind me.

Once in a while, I have to change the IP address of a remote network. For instance, Comcast came into a customer of mine and replaced the modem/router. When they did, they put in their own local IP network number and broke the ability to get to any hard-coded IP addresses on the network (like printers). They used to be a 192.168.0.x network and now they were a 10.1.10.x network.

I could change all the hard coded devices to the new IP address scheme OR I could fix the network. It is a lot easier to change the one network than all the devices (on devices I can't easily reach because they are on another network, now, so I'd have to set up temporary IP routes and etc. etc. etc...).

The problem with changing the IP address on a router remotely is that you won't have access to the computer you remote in on after the change because it is still on the wrong network until a reboot.

So here's the simple trick to fix it all at once...

Did this help you? You can help me!


Did you find this information helpful? You can help me back by linking to this page, purchasing from my sponsors, or posting a comment!


+One me on Google:


Follow me on twitter: http://twitter.com/mojocode









Affiliation Badges